ge-nx-592e-cdma-zx-vz-installation-guide


Click the link below to find the GE Interlogix NX-592E-CDMA-ZX-VZ installation guide. In the NX-592E-CDMA-ZX-VZ installation guide you will find valuable information such as, installation tips, status led indicator chart, installation guidelines, needed tools and supplies for installation, module location tips and much more!

The GE Interlogix NX-592E CDMA Alarm.com cellular communicator can be used on NetworX 4V2, 6V2, 8V2, and 8E wired security systems. The communicator interfaces with the NetworX panel data bus and is powered by the panel. The Alarm.com bus module for NX is made of two parts: A bus module (NX-592E) that connects to the panel via 3 bus wires, and the CDMA radio daughter board that plugs onto the NX Gateway board. The CDMA radio daughter board is the only new part.

If you are looking to reduce your monthly alarm monitoring rates for your home or business make sure to contact GeoArm Security at 1-877-443-6276 for your free consultation! We are usually able to takeover just about any kind of security system, including GE Interlogix NetworX panels, so don’t hesitate to give us a ring.

Alarm Monitoring Services

GE Interlogix NX-592E-CDMA-ZX-VZ - Product Manuals


GE Interlogix NX-592E-CDMA-ZX-VZ - Frequently Asked Question's