Modified on: Tue, 25 Jun, 2019 at 5:43 PM
Click the link below where you will find the Honeywell Lyric controller smart scene user manual. In the Lyric controller smart scene user manual you will find valuable information to assist you with adding, deleting and editing smart scenes.
You will also locate information on smart scenes and user access abilities as in whom will be able to create and edit them.
The Smart Scene feature is used to control Security functions as well as a single Z-Wave home automation device, or multiple Z-Wave devices that will be turned ON/OFF, or to a user-defined preset lighting level, temperature or locking state.
The Lyric controller has three types of Smart Scene that offer convenient automation of security and lifestyle settings.
• Anytime Smart Scenes are initiated by users.
• Triggered Smart Scenes are initiated by the system in response to user-defined conditions occurring, such as System armed away, stay or disarmed, Burglary Alarm, Carbon Monoxide and Fire Alarm, or Sensor open or close.
• Scheduled Smart Scenes can be initiated by a combination of these things: Sunrise, Sunset, Time of Day, day or days of the week, as well as a randomized time, within 30 minutes of the start time.
Smart Scenes can control: *Automation Devices --Thermostats – Z-Wave and Wi-Fi --Locks and Garage Doors --Lights and Appliances --Shades and Blinds --Water Valves *Security Actions ---Arm Away (End of Exit Delay) or Arm Stay All Smart Scenes can be modified with the Edit command and manually started with the Run command.
Scheduled and Triggered Smart Scenes can be paused with the Hold command.
A total of 100 Z-Wave Scenes can be created locally in the panel if there is no TC2 account. Once the TC2 account is set up scenes can only be created or edited via Total connect 2.0.
Did you find it helpful?Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.
Do You Have any Discussion Questions?
comments powered by Disqus