how-to-change-the-honeywell-sixsiren-batteries
To change the Honeywell SiXSIREN batteries follow the instructions below:

1) Twist the front cover counterclockwise and separate it from the mounting bracket.

2) Remove the batteries, wait 10 seconds and insert four new batteries of the same type and brand. 

*Recommended replacement batteries: 1.5V AA Lithium batteries [Non-Rechargeable]
*AA Alkaline batteries can be used, but battery life, But battery life will be drastically reduced.


Note: Do not mix old and new batteries, battery types or manufactures.

3) Reattach the front cover and twist clockwise to secure it into place.

Battery caution: Risk of fire, explosion and burns. Do not recharge, disassemble, heat above 212f or incinerate. Dispose of used batteries properly. Keep away from children.

The SiXSIREN two-way wireless siren is for use with Honeywell Controls that support SiX series devices. Once the device is enrolled into the panel, it cannot be used with another control panel until it has been deleted first. Each device has a unique MAC number located on the sticker on the unit.

If you are looking to reduce your monthly alarm monitoring rates for your home or business make sure to contact AlarmClub at 1-844-335-5897 for your free consultation! *We are usually able to takeover just about any kind of security system so don’t hesitate.

Alarm Monitoring Services

Honeywell SiXSIREN Product Manuals

Honeywell SiXSIREN FAQ's