Modified on: Tue, 25 Jun, 2019 at 5:45 PM
This video will show you how to program the Honeywell 5816 wireless door/window contact with a delay and auto learning the serial number into the Honeywell LYNX Plus L3000 wireless security system. To program from the Honeywell L3000 home screen select 4112 800, *56, select available zone, *,01 *, c10 *, d3rf *, separate the contact and magnet two times to learn serial number *, verify serial number, *, 00 *99 to exit Honeywell L3000 programming. To test to make sure your Honeywell L3000 is sending signals contact GEOARM Security.
The Honeywell 5816 door/window contact is a 2 zone wireless transmitter with both built-in magnetic reed switches and wired closed circuit contact loop. It Features a standard white plastic case “a brown case is available in packs of three 5816BR” and included is a supervised replaceable CR123 battery. Instant Perimeter is a setting used when the end user arms their system up and a zone is opened while the system is armed there will be no delay time allowing them to disarm the system before the alarm goes off. The alarm will sound and you will receive a call from our central monitoring station if you have activated alarm monitoring. As well as a notification from total connect 2.0 applications on your smart device if activated as well.
The Honeywell 5816 contact is one of the larger contacts that Honeywell makes but, for overall applied usage the Honeywell 5816 is a great addition to your alarm system. With its larger size comes a larger antenna, this antenna provides you a much better range from the contact to the panel.
A cool feature that the Honeywell 5816 carries is its ability to carry one hardwired contact. This application is perfect for garage doors needing an overhead garage door contact. All you have to do is hard wire the overhead garage door contact to the provided terminals inside the 5816 wireless Door/Window contact and program the contact as a loop one instead of loop 2. Stay tuned to our support center and make sure to follow our YouTube page where we will have a video on how to do this.
For the lowest No-Term alarm monitoring rates contact GEOARM Security 1-877-443-6276.
Honeywell LYNX Plus L3000 Frequently Asked Questions
Alarm Monitoring: http://bit.ly/geoarmmonitoring
Geoarm Security Blog: http://bit.ly/DIYSECURITYBLOG
Did you find it helpful?Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.
Do You Have any Discussion Questions?
comments powered by Disqus