Modified on: Tue, 25 Jun, 2019 at 5:45 PM
This video will show you how to program a Honeywell 5800PIR-RES wireless motion detector into the Honeywell LYNX Touch L5210 wireless security system using an interior delay setting.
The first thing that you will want to do is remove the Honeywell 5800PIR-RES motion sensor from its packaging box, remove the back cover, insert the battery and seal the 5800pir-res motion sensor up. Now from your Honeywell L5210 system select security, more, tools, enter installer code “default is 4112”, program, select an available zone, edit, highlight serial number, wave your hand in front of the motion in a series of three as shown, provide zone description, response type interior delay, report yes, chime disabled, supervision supervised, save, back, scroll down, system settings, auto stay arming select to correct setting based on video, save, back, yes and exit to the home screen. Once this has all been completed contact Geoarm Security so that we can make sure we are receiving the alarm signals from your newly programmed Honeywell 5800PIR-RES wireless motion sensor.
During the power up of the Honeywell 5800PIR-RES you will notice it will begin a series of red flashing lights. The first series of lights will flash every second for 45 seconds this is called the power up stage. Once the power up has finished the Honeywell 5800PIR-RES will than transition into a 10 minute walk through test where the red light will flash for three seconds every time an object passes through the detection area. The purpose of the walk test is to identify the proper mounting location for the Honeywell 5800PIR-RES wireless motion sensor. If you need to reset the walk test remove the battery from the motion and replace it again resetting the power up of the Honeywell 5800PIR-RES motion sensor.
The Honeywell 5800PIR-RES wireless motion sensor carries an 80lbs pet immunity. In order to optimize this feature make sure to install the Honeywell 5800PIR-RES wireless motion where an animal cannot come within 6ft of the sensor by climbing on furniture or other objects, aim the sensor away from stairways, furniture or other objects that can be climbed on by animals and don’t use the optional swivel mount bracket that comes with the sensor.
The Honeywell 5800PIR-RES wireless motion sensor uses a cr123A ION Lithium battery. You can expect about 3-5 years of battery life. When installing the Honeywell 5800PIR-RES motion sensor take into consideration the operating temperature which is between 14 degrees – 131 degrees Fahrenheit. Lastly make sure you install the Honeywell 5800PIR-RES motion between 7.5ft-8ft for optimal detection.
For the lowest No-Term alarm monitoring rates contact GEOARM Security 1-877-443-6276
Honeywell LYNX Touch L5210 Frequently Asked Questions
Alarm Monitoring: http://bit.ly/geoarmmonitoring
Did you find it helpful?Send feedback
Do You Have any Discussion Questions?
comments powered by Disqus