Honeywell SiXSMOKE FAQ's
Yes, the Honeywell SiXSMOKE can be auto programmed, when the Lyric controller is ready to receive the transmitter's information, pulling the battery ...
Tue, 25 Jun, 2019 at 5:39 PM
The Honeywell SiXSMOKE encrypted wireless smoke/heat detector has a battery life of 5 years with (typical use). Note: Do not mix old and new batteries, b...
Tue, 25 Jun, 2019 at 5:41 PM
The Honeywell SiXSMOKE encrypted wireless smoke/heat detector is for use with Honeywell systems that support SiX series devices. Once the device is enro...
Tue, 25 Jun, 2019 at 5:42 PM
The Honeywell SiXSMOKE encrypted wireless smoke/heat detector has a maximum coverage area of 50ft x 50ft (refer to National Fire Alarm Code Standard NFPA 7...
Tue, 25 Jun, 2019 at 5:42 PM
Yes, the Honeywell SiXSMOKE can be remotely upgraded via AlarmNet 360, or locally upgraded via the Lyric Panel. When the panel is updated all the SiX wir...
Tue, 25 Jun, 2019 at 5:42 PM
Yes, the Honeywell SiXSMOKE has one Bi-Colored LED that lights Red or Green to indicate enrollment status into the Lyric controller, Maintenance, Tamper,...
Tue, 25 Jun, 2019 at 5:43 PM
The Honeywell SiXSMOKE has no specified limitation to the life of this detector. It should be tested annually for sensitivity and smoke entry testing. The ...
Tue, 25 Jun, 2019 at 5:43 PM
Yes, the Honeywell SiXSMOKE encrypted wireless smoke/heat detector will always report its battery status to the control panel so the battery level can al...
Tue, 25 Jun, 2019 at 5:43 PM
The Honeywell SiXSMOKE encrypted wireless smoke/heat detector can be mounted on the ceiling or on the wall (if local ordinances permit). Select a locatio...
Tue, 25 Jun, 2019 at 5:43 PM
Yes, the Honeywell SiXSMOKE detectors can be set up to sound all smokes when any go into alarm. This is an adjustable feature for each smoke detector in...
Tue, 25 Jun, 2019 at 5:44 PM